Premium Stable Doors
Our timber stable doors are bespoke made to suit your exact requirements. We let you choose every aspect of the stable layout so you can opt for a higher or lower division are required. Each stable door can incorporate traditional locks and bolts or stable multipoint locking mechanisms with 3* eurocylinders to offer high security options. With turnarounds as little as 4 weeks we are a great choice for your timber project.
Get in touch now to discuss your project on 01633 740631 or email us at enquiry@bifoldingsuperstore.co.uk
Get In Touch Today For A Free Quote
Why Use Our Timber Products
Industry Leading Hardware Systems
10 Year Guarantee
Easy Installation
Timber Stable Doors
- Quality timber used throughout our products
- Specify every aspect of your doorset and locking mechanisms
- Available as glazed or unglazed
- Multipoint or traditional locks available
Partnering With The Best
Known for being one of the leading manufacturers of Architectural hardware worldwide.
Our Standard Finishes
Each system is pre finished leaving little to do on site after installation.
The paint systems we use are carefully selected to increase the lifespan of our products and make maintenance easier.
Painted Systems
Each system undergoes the following process to ensure a perfect finish that will last.
- 3* Wood Preserver (All timbers are preservered to reduce the risk or blue funghi and insect attack)
- Knotting Solution (All knots and resinous timbers are treated to prevent bleed through)
- End Grain Sealer (All end grain sections and weak spots are sealed to reduce moisture intake in these areas)
- Primer (all timbers are primed to aid paint adhesion and prevent tannin bleed from certain oily timbers)
- Undercoat (Flexible oil based undercoat by Johnstones is applied)
- Top Coat (Flexible top coats by Johnstones are applied, available in Satin, Gloss and Eggshell.
All our products are hand painted to ensure a finish which not only looks traditional but can be reapplied time and time again as required. We do not spray any of our products as we find that spray finishes give a plastic look and detract from the natural timber look.
Varnished & Stained Systems
Each system undergoes the following coating process
- 3* Wood Preserver (All timbers are preservered to reduce the risk or blue funghi and insect attack)
- End Grain Sealer. (End grains are coated to reduce moisture intake)
- Base Coat (A base coat is applied if required, based on timber and coating used)
- Top Coat (2 coats are applied to provide the neccessary weathering)
Most varnishes and stains will require recoating after the first year of weathering. This is perfectly normal and usually requires a quick coat on the outside of the system only.
Take A Look At The Specifications
Technical Details
Frame sections can be chosen to suit your requirements. Our standard sections are 63mm wide by 100mm deep.
Door Stiles are finished at 110mm wide to incorporate multipoint locking mechanisms.
Stainless Steel ball bearing hinges used on all our products.
Colour Options
Our products are hand painted and can be coated in a colour or finish of choice.
As standard we use the Johnstones Flexible paint system for opaque systems and Osmo UV Protection Oil for stained/varnished systems. This is purely due to our experience as it provides the neccessary protection from weathering. However if you need us to match existing joinery you have then we are happy to use a paint system of your choice.
Sill Options
Our timber sills are bespoke made and can have a projection to suit your requirements. Typical projections are 60mm to 90mm.
We can create a stepped/rebated sill to sit over wall cladding to produce a highly weathered frame if needed
Addons and Trickle Vents
We offer trickle vents on all our products. These are usually situated in the head section of the frame and require an internal vent and external canopy.
Glazed and Unglazed Options
Glazed Systems
The glass we supply can be specified to any configuration.
As U values are a huge factor in specifying glass options, we are happy to offer any Pilkington glass range from ‘Low e’ K glass to Optitherm to meet the center payne U value you require for your project.
All our glass is safety toughened as standard but we also offer laminated units for added security. These are typically a 6.4mm laminated outer payne with a 4mm toughened inner payne to help keep intruders out.
Unglazed Systems
ALL our bifolds are prepared for a glass thickness 22mm overall as standard. If you are purchasing integral blinds elsewhere to install into our doors then please state this when ordering or let us order them for you.
If you are sourcing your own glass then please ensure the glazing meets the required Building Regulations.
Doors must be toughened or laminated safety glass.
Stable Door Delivery Information and Lead Times
Once you place an order we will confirm a production slot and delivery time frame. All our stable doors are glazed ready to install.
Bi Folding Superstore pride ourselves on having a fully transparent ordering routine and this means a smooth process throughout.
Lead times are approx 4 weeks but can be 8 -10 weeks during busy periods and for special orders
Want to discuss your project?
Call now on 01633 740631 or email us to start your project the right way